Pressing and Care Instructions
DTF Heat Transfer
- Set the heat press to a temperature to 310°F.
- Press garment for about 5-10 seconds without the DTF transfer sheet.
- Place DTF transfer sheet in desired location and press for 15-20 seconds.
- Peel transfer film COLD PEEL.
- Place a piece of parchment paper over the design and press for an additional 5-10 seconds.
To care for DTF prints and keep them vibrant, always turn the garment inside out, wash in cold water on a gentle cycle with mild detergent, and avoid bleach, fabric softeners, and high heat; air dry or tumble dry low, and never iron directly on the print, instead ironing inside out or with a pressing cloth
------------------------------------------
Small Heat Patches
- Set heat press to 375F.
- Cover with teflon.
- Press 15-20s with medium or heavy pressure.
- Turn garment inside out and press another 15s.
------------------------------------------
Spangle Transfers
- Set heat press to 305F.
- Remove backing from design.
- Cover with teflon.
- Press for 5-7sec with medium or heavy pressure
- Peel transfer film COLD PEEL